How to save battery life on your Android phone
This article has been up to date to correct blunders in the section about how to disable Doze Mode.
My first Android smartphone was once the unique Motorola Droid, which I bought and cherished the usage of despite its abysmal anti-woman marketing campaign. And one of the things I loved about it was once that it had an interchangeable battery. I usually saved an greater charged battery on hand, and actually swapped them out when needed. It was a lot extra handy and lightweight than dragging around a heavy battery pack, and stored the smartphone going strong over the route of the busiest workday.
But as phone designs changed over the years, swappable batteries have been abandoned by smart phone manufacturers to maintain their telephones sleeker and to accommodate wrap-around screens. Batteries are getting stronger, however phones are additionally getting extra use. So regardless of advances in power technology, your phone may additionally still run out of electricity earlier than the quit of the day — mainly if your gadget is a 12 months or two old.
If you’re experiencing that problem, you’ve bought a few options. You can buy a new smartphone (unless you nevertheless like your cutting-edge phone, or if your finances is limited). You might also be able to have the battery replaced, depending on which phone you have. (If you have an iPhone, it tends to be easier.)
Or you can follow these guidelines to help you monitor and lengthen the usage of your battery.
Understand how Doze Mode works
Introduced in Android 6.0, Doze Mode makes sure that the apps in your phone aren’t using battery power when you’re not using your phone. There’s nothing you have to do — Doze Mode automatically kicks in when your phone has been unplugged and motionless for a certain length of time. At that point, certain apps are denied access to the network, and their processing jobs (such as checking for updates or for news) are halted, except for periodic moments when they are allowed to access the network for updates and syncs.
In other words, when your phone isn’t being used, many of your apps get to take a nap until you need them again.
Now, you may not want all your apps to experience Doze Mode. If you have an app that is constantly updating for your job, you may want it to continue working even when you’re not using the phone. Here’s how you do that:
- Go to your phone’s settings and select “Apps & Notifications.”
- Scroll down and select “Advanced” > “Special app access” > “Battery optimization.”
- You’ll see a list of all the apps that are not optimized for Doze mode. Tape on the “Not optimized” button on top and choose “All apps.”
- Most (but not all) of your apps will be labeled “Optimizing battery use.” You can go down this list of apps and choose any app that you want to exempt from Doze Mode. When you see one that you want to exempt, tap on the name of the app and then select “Don’t optimize.”
Enable Adaptive Battery and Adaptive Brightness
Two battery-saving features, Adaptive Battery and Adaptive Brightness, use AI to learn how you use your apps and screen, and adjust them to suit your habits. The idea is that your apps and display will only pull power from the battery when they are needed. You should have both turned on by default, but it never hurts to check and make sure.
To turn on Adaptive Battery:
- Go to your phone’s settings and select “Battery.”
- Find and tap on “Adaptive Battery.” Enable it if it isn’t enabled already.
Something worth noting: While you can turn Adaptive Battery off (by following the same process), your phone will continue to remember what it’s learned so far — and there’s no way to reset the tool and start again. So if you’re experiencing issues with an app (if notifications are slow, for example) and suspect it may be Adaptive Battery causing them (because it has “learned” something that is causing the issue), the only way to start from scratch is to do a complete reset of your phone.
To turn on Adaptive Display:
- Go to your phone’s settings and select “Display.”
- Find and tap on “Adaptive Display.” Enable it if it isn’t enabled already.
Use an app
AccuBattery measures your battery’s use over time, and lets you look for any degradation. It can let you know when your battery is full, or let you set the battery to charge to slightly less than 100-percent (since many believe that charging a battery to 100-percent will speed up the battery’s degradation process). It will also estimate how much time you have left, depending on how you plan to use the phone.
Greenify, meanwhile, lets you force apps to hibernate (whether they want to or not), saving you from unwanted battery drain.
Turn unnecessary apps off — or uninstall them
Speaking of hibernating, it doesn’t hurt to do a periodic check of all the apps you have and either get rid of or restrict any that are unnecessarily using battery power.
The first step is the easiest: Go through your app drawer and see if there are any apps that you don’t recognize (because they’ve been sitting in there so long), or that you’ve gotten tired of. Why let them use resources? Uninstall them.
It’s also a good idea to find out which apps are using the most power. (Note: these instructions are for a Pixel phone; it’s possible that your phone may work slightly differently.)
- Go to “Settings” > “Battery” and tap on the “More” symbol and on “Battery usage.”
- You can also tap on the “More” symbol again to select “Show full device usage,” which will tell you where most of your battery power is being used.
If you see any apps that you feel are using too much power, you can stop them from operating in the background.
- From either the “Battery usage” or “Show full device usage” list, tap on the app you’re interested in.
- Look for “Background restriction.” If you find it (it won’t be there for all apps), tap on it.
- You will get a warning that the app may not work properly if it can’t work in the background. Tap on “Restrict” to go ahead and stop it from operating in the background.
Use Battery Saver
Battery Saver’s purpose is to keep your phone going when power levels are getting low. It stops apps from working in the background, halts location services when your screen is off, stops Assistant from listening for “Hey, Google,” and otherwise tries to make your battery last as long as possible.
You can determine at what point Battery Saver will kick in automatically. (As always, these steps could vary depending on which phone you use.)
- Go to “Settings” > “Battery” > “Battery Saver.”
- Make sure “Turn on automatically” is active.
- Determine at what percentage you want it to activate (15% is a good place to start).
If things get desperate
Sometimes, despite all your precautions and even with Battery Saver turned on, you can find yourself with an almost-depleted battery and no immediate access to a power source. In that case, you want to keep your device powered as long as possible so that you can at least make or receive phone calls or texts. There are a number of steps that can help, although some may interfere with normal usage.
- Make sure all your apps are closed.
- Enable Do Not Disturb mode to stop notifications.
- Set your screen timeout for 30 seconds, so that the screen won’t stay on if you’re not actively using it.
- Lower your screen brightness as much as you can.
- Turn off Bluetooth, location tracking, and Wi-Fi (unless you are actively using it). You can also use Airplane mode, unless you’re expecting a phone call or text.
- Turn off your notification light if your phone has one.
- Turn off all your app sounds and vibration.
- If your phone has an OLED screen, using dark mode can help save power. Some phones, such as those using Samsung’s One UI, have a system-wide dark mode, so it’s a good idea to check to see if it’s available. For the rest of us, the next version of Android should have a system-wide dark mode as well.